Seeed Xiao ESP32S3
Fully compatible
This product is fully compatible with OpenShock.
See the official webpage for a more exhaustive description.
Specifications
- ESP32-S
- 8MiB Flash
- 8MiB PSRAM
- Detachable antenna
Flashing
Extra steps required
Please read this section carefully.
On the first picture in the Media section below, aside the USB-C are two (extremely small!) buttons.
- The "R" button is "Reset";
- The "B" button is "Bootloader".
To flash, you need to enter bootloader mode. Follow these steps:
- Unplug the board.
- Hold down the "B" button.
- Replug the board while holding it down.
If everything went correctly, you can now flash the board using a flashing tool like esptool
. After flashing, press "R" to reset the board into normal boot mode.
Media
Info
The antenna is detachable. The back side of the antenna has adhesive tape.